Light structures
The most ductile grade in the range. Boundary walls, single-storey work and low-load members. Easiest to bend on site.
Jalna, Maharashtra · Supplying across India · Exporting worldwide
Reinforcement steel,
sized for your slab.
Bars for foundations, columns and slabs — sourced against your drawing and delivered with the papers that prove what they are.
See what we carryIncluding the D grades for seismic work.
Ten sizes, all held to IS 1786.
Send it in the morning, have a rate by evening.
Need less? Ask anyway — we will tell you what we can do.
What we supply
Four grades, each suited to a different kind of structure. If you are unsure which one your drawing calls for, send us the structural detail and we will read it with you.
The everyday choice
The grade most residential and commercial buildings are designed around. A balance of strength and bendability.
Seismic zones
Same strength as Fe 500 but far more ductile. Specified for seismic zones III and IV — which covers much of Maharashtra — and for high-rise work.
Heavier loads
For long spans, industrial sheds and members carrying larger loads where the drawing calls for a higher yield strength.
Critical infrastructure
Fe 550 strength with the ductility a high-seismic-risk structure needs. Bridges, industrial plant and critical public works.
High-strength work
Specified on large infrastructure and high-rise projects. Lets a designer carry the same load with less steel.
Grade properties under IS 1786
These are the minimums the Indian Standard sets for each grade. Your structural drawing will name one of them — match it exactly rather than substituting a higher number, because a stronger bar is also a less ductile one.
| Grade | Min yield strength | Min tensile strength | Min elongation | Max carbon |
|---|---|---|---|---|
| Fe 415 | 415 N/mm² | 485 N/mm² | 14.5 % | 0.30 % |
| Fe 415D | 415 N/mm² | 500 N/mm² | 18.0 % | 0.25 % |
| Fe 500 | 500 N/mm² | 545 N/mm² | 12.0 % | 0.30 % |
| Fe 500D | 500 N/mm² | 565 N/mm² | 16.0 % | 0.25 % |
| Fe 550 | 550 N/mm² | 585 N/mm² | 10.0 % | 0.30 % |
| Fe 550D | 550 N/mm² | 600 N/mm² | 14.5 % | 0.25 % |
| Fe 600 | 600 N/mm² | 660 N/mm² | 10.0 % | 0.30 % |
A D after the grade means higher ductility at the same yield strength — the bar stretches further before it fails, which is what matters in an earthquake. Not every grade is held in every diameter at every moment; ask us before you specify.
Test certificates come with the material
Every consignment we deliver is accompanied by the manufacturer's test certificate for that heat number, so your engineer can check yield strength, elongation and chemical composition against the drawing before the steel goes into the pour. Ask for it at the time of order and it travels with the lorry.
Work out what you need
Steel is sold by weight but drawn by length. Put in a diameter and a length and this works out the weight, using the standard formula d² ÷ 162.
1,066.67
kg
1.067 tonnes
- Weight per metre
- 0.889 kg
- Weight per bar
- 10.67 kg
- Bars in one tonne
- 93
These are nominal weights to IS 1786. Actual rolled weight varies slightly within the tolerance the standard allows.
Full weight table, 8 mm to 40 mm
| Diameter | Weight per metre | Weight per 12 m bar | Bars per tonne |
|---|---|---|---|
| 8 mm | 0.395 kg | 4.74 kg | 210 |
| 10 mm | 0.617 kg | 7.41 kg | 135 |
| 12 mm | 0.889 kg | 10.67 kg | 93 |
| 16 mm | 1.580 kg | 18.96 kg | 52 |
| 20 mm | 2.469 kg | 29.63 kg | 33 |
| 25 mm | 3.858 kg | 46.30 kg | 21 |
| 28 mm | 4.840 kg | 58.07 kg | 17 |
| 32 mm | 6.321 kg | 75.85 kg | 13 |
| 36 mm | 8.000 kg | 96.00 kg | 10 |
| 40 mm | 9.877 kg | 118.52 kg | 8 |
The material
Thermo-mechanically treated bars: a hard outer ring for strength, a softer core so the bar still bends on site without cracking.
Bundled and strapped
Bars arrive banded in standard bundles, counted and weighed before dispatch.
Ribbed for grip
The rib pattern is what locks the bar into the concrete instead of slipping under load.
Hard outside, tough inside
Quenching hardens the surface while the core stays ductile — strength without brittleness.
Tied into a cage
Bars only work as a cage — laps, stirrups and tie wire holding the grid true while the concrete goes round it.
Loaded and on its way
Counted, weighed and strapped before it leaves — with the invoice and the test certificate travelling alongside it.
Sorted by grade
Every bundle tagged with its grade and heat number, so nothing gets mixed on the way to your site.
Check it before it goes in
Ribs evenly spaced, the mill mark rolled into the bar, weight within tolerance. Three things worth looking at on any delivery — ours included.
Steel is bought on trust
and checked on paper.
We send both, every time.
Why Devmansh
Steel is a commodity. Getting it on time, at a fair rate, is not.
Every dealer sells the same bars. What separates one from the next is whether the phone gets answered, whether the rate quoted on Monday is the rate invoiced on Wednesday, and whether the lorry turns up when it was promised. Those are the three things we compete on.
We quote against the day's market and tell you plainly how long that rate holds — no padded number that we quietly discount later to look generous. Because we source rather than sit on stock, we are not tied to one mill: if a grade or a diameter is short at one supplier, we look at another instead of asking you to wait.
Devansh runs this firm himself and answers the phone himself. When you call about a delivery, you are talking to the person who arranged it, not to a desk that has to check with someone else. The firm is young, which means our name is still being built — one order at a time, and we intend to build it properly.
- Same-day quotesSend your requirement and we come back the same working day.
- Rate held in writingWhat we quote is what the invoice says, for as long as we said it would hold.
- Not tied to one millMultiple sources, so a shortage at one does not become your delay.
- Papers with the materialInvoice and the manufacturer's test certificate travel with the lorry.
If any of that turns out not to be true of us, tell Devansh directly on WhatsApp at +91 95279 97766. A firm this size cannot afford a bad delivery, and we do not intend to have one.
How ordering works
Four steps from your first call to steel on your site.
-
Send us your requirement
Grade, diameters, quantity in tonnes and the delivery location. A photo of the bar bending schedule works just as well as a typed list.
-
We quote the rate
Steel rates move daily, so we quote against the day's market and tell you how long the rate holds. Nothing is published on this page for that reason.
-
We agree the terms
Payment terms are settled directly between you and Devansh, in conversation, and confirmed in writing on the invoice before dispatch.
-
Material is dispatched
Your order is loaded and sent to site with the invoice and the manufacturer's test certificate for the material supplied.
About the firm
Devmansh Trade Corporation is a steel trading firm based in Old Jalna, Maharashtra, founded and run by Devansh Hajare. We buy reinforcement steel from established rolling sources and supply it onward to builders, contractors and site owners.
The firm is in its first year. That means we are building our name one order at a time, and it is the reason we answer the phone ourselves, quote quickly, and stay reachable after the lorry leaves. A small firm cannot afford a bad delivery, and we do not intend to have one.
Because we source rather than stock, we are not tied to a single mill. If a grade or a diameter is short at one source, we look at another instead of asking you to wait.
- Founder
- Devansh Hajare
- Registered office
- Old Jalna, Maharashtra
- GSTIN
- 27BNQPH3244B1Z6
- Business
- Steel trading and supply
Add a photo of the office or a loaded consignment here — save it as images/office.jpg
Get a quote
Fill this in and we will come back with a rate. If you would rather talk it through, call or send a WhatsApp message — that is usually faster.
Visit the office
Devmansh Trade CorporationMillennium Plaza, Shop No. S-8, Second Floor
Mamadevi Temple – Railway Station Road
Old Jalna, Maharashtra 431213
India Open in Google Maps
Millennium Plaza
Shop No. S-8, Second Floor · Old Jalna
Open in Google Maps